Đèn siêu sáng nhập khẩu Ipower thông minh XM-L2 Flashlight Searchlight zoom x1 18650

Flashlight Description

one. Switch Description Use

1, the battery is positive inward (lamp side), the negative outward (aft).

2, the switch in the tail, bearing safety switch is a switch function switching function, tap the switch is dimming function.

two. Board Instructions

1 OUR torch using advanced voltage constant current technology, can effectively solve the LED flashlight on the constant current regulator requirements.

2, Special Note:. A Do not use excess pressure, battery voltage should not exceed 4.2V b positive root forward, not inverted, otherwise it will burn control board c note torch temperature changes, to ensure the cooling d non-professionals... Do not open the circuit board

3. Warranty: open or treated board no longer warranty.

three. Lithium battery Description

1, the main battery flashlight 18650 lithium battery.

2, Li-ion battery features: lithium batteries and battery charging in a completely different way; lithium batteries have no memory, rechargeable at any time, do not overcharge and over discharge.

3, the first charge 6 hours at least, after the green light on the charger according to it. I will not overcharge.

4, lithium batteries naturally discharge rate when not in use, the approximate daily release its charge of 1% or less, although slow, but to prevent placing too long.

5, pay attention to the battery waterproof, period, drop and so on.

6, special tips to use anti-overcharge, anti-reverse, anti-short circuit "three" charger;

7, do not use the battery for a long time, should be stored fully charged, the normal three months or so and then charge and discharge;

8, Warranty: after battery factory is no longer covered by the warranty.

four. Flashlight instructions

1, the torch is in use, according to the torch voltage and battery requirements for selection, not to abuse, to prevent burn circuit boards, different models, different voltage batteries Do not use.

2, in use, when the brightness of the flashlight change significantly when you want to close the torch, causing the battery to prevent over-discharge.

3, cooling techniques: the torch during use, to ensure heat dissipation. Strongly urge the battery is fully charged, it is best to use second gear, this can make the caps and flashlight batteries are extended product life! Hand clenched flashlight is the best heat dissipation square style; recommendations should be promptly placed lit when the heat or turn off the heat generation by flashlight until the temperature down and then lit to heat.

4, for a description of the torch waterproof, shockproof, and prevention.

5, the inner wall of the lamp cup kept clean, absolutely not hand or hard object wipe; Chen Qing fingerprints on the lens, the available cotton swab lens cleaner and gently wipe.

6, the torch of light is not direct people's eyes, bright glare, so as not to affect vision, especially children.

7. If not using the flashlight remove the batteries (one month or longer) to avoid chemical corrosion.

Fives. Protection Description

1. Do not torch a long-term and sunlight, water, chemicals and corrosive gases and other contacts, to avoid damage to the torch protective layer.

2, in order to maintain the "O" ring and screw rotating smooth, press 2-3 times a year on its surface wipe Vaseline oil.

six. Troubleshooting

1. Check Battery: Make sure the battery has power and installed batteries in the correct direction, do not use different brands of batteries not mix old and new batteries.

2, check the tail cap: Make sure the switch has been tightened and good contacts to ensure that the end cap and the end cap clamping ring pillars sheet metal contact.

3, note that the cap is loose.

Some common misconceptions buy flashlight

Myth: The brightness is not better

To enhance the brightness of the flashlight from one method to the reflector lamp, battery, main pull design comprehensive platform upgrade. Domestic and international big brand-name products, after a rigorous design and testing to ensure the life and safety.

Method two is used to increase the voltage and current to achieve: a huge overclocking brings in enough heating purposes, because they do not match, resulting in frequent burning lamp and regular over-discharge lithium batteries, lighting only a few minutes and often in need of repair .

Myth: be misled by false arguments

Many sellers vacuity lumens value unintentional

Myth: orange peel reflector is not necessarily better than the smooth

Reflective efficiency orange peel reflector than the glossy lower, you can find high-power light basically bowl with search lights on the market, because the reflective, high efficiency, long range. So why most tactical flashlight orange peel reflector use it? The reason is simple, in order to obtain a perfect spot. Because we are all generally used light bulb filament, reflector and reflected spot happens to be a projection of the filament, the principle is similar to the principle of relative convex lens. This spot is a clear filament, it is difficult to see. We also look to see the actual effect parameters!

OUR sell flashlight real dimension brightness, long battery life, light color pure transparent white, perfect concentrating effect! Engineering work, field sports, excellent aids!

Advantages of the flashlight: small size, light weight, portable, durable, all-weather use with features, light strong, direct distance, strong or weak light optional, light - far, the low light - a recent photograph, emergency - explosive flash. Top oxide titanium alloy to strengthen the attack hit a head design, alternative safety hammer used to smash windows to escape in case of emergency.

【common problem】

Q: need to re-use it charge?

A: Please use a flashlight and other light-dark point, and then charged for 4 hours before use, lithium batteries are most afraid of discharge, please develop the habit usually charging.

Q: The bulb is broken how do?

A: 10W hours of lamp life in case of unfortunate really bad, you can contact us, discount exchange.

Q: What is lithium battery overdischarge?

A: continue to use the brightness significantly reduced, resulting in damage to the battery, even after professional activation press for, power will be significantly reduced, so usually please note battery maintenance, charging a lot.

Flashlight Caution

Lamp do not often disassembled, to avoid reflective glass or bulb damage.

Flashlight Maintenance Considerations

Please flashlight daily routine maintenance so that it can continue to provide you with high-quality services when using

Please flashlight wipe with a clean soft cloth 1. After each use.

2. When the torch when contaminated seawater or corrosive liquids please wash with water and with a hair dryer.

3. When screwing the cap and the tail cap is not smooth, please dab of grease at the interface.

4. Flashlight the battery when not in use, remove the cool place to save.